Browse Our Catalogue

 Newsletter


Contact Us

  

 

 

Hub UDC CrMo 36H Cotterless

The UDC CrMo Hub - a new super hard cotterless hub specially produced for Unicycle.com, with wider flange spacings for a much stronger wheel.
Center Flange to center flange distance is 71mm. Flange OD is 66mm. Flange width is 3mm. Center bearing to center bearing spacing is 100mm.

Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.

Should you want to build the wheel, here is a link to the Unicycle.com's United Kingdom spoke calculator so you can find the correct spoke length you need.

  • Uses 40mm bearings.
  • Center Flange to center flange distance is 71mm.
  • Flange OD is 66mm. Flange width is 3mm.
  • Center bearing to center bearing spacing is 100mm.
  • The wider the space between flanges, the stronger the wheel. These flanges are much farther apart than those on most hubs. If you are not sure contact us before ordering.
  • Includes a pair of high tensile strength bolts and 17 x 40mm double seal bearings.

    Hub detail:
  • Flange Diameter: 56.2mm
  • Hub Width: 71.5mm
  • Spoke hole diameter: 2.8mm
  • Hub Drilling: 36
  • Spoke Interface: J-Bend

    Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.
Item Code: UP-HUB-UDC-36CRMO
Item Unit: EACH
$35.00 (Inc GST)
none